MBZ Full Standalone

These are the components needed in the full version, including 2 voltage regulators, I2C bus header, digital 3.3V level shifter and Wifi module.


List of Components

Component

Value

Picture

MicroprocessorATMega328P-PU with bootloader
 ESP-01ESP8266 - Wifi module
CD4050CD4050 (74HCF4050BE) - level shifter
7805LM7805 - 5V voltage regulator
1117LM1117 - 3.3V voltage regulator
C1, C222pF - ceramic capacitors (marked "22")
C3, C7100nF - ceramic capacitors (marked "104")
C4, C5, C6, C847µF / 16V - electrolytic capacitors
R1, R5, R610KΩ - resistors, tolerance ±5% (brown, black, orange, gold)
R24.7KΩ - resistor, tolerance ±5% (yellow, violet, red, gold)
R3, R41KΩ - resistors, tolerance ±5% (brown, black, red, gold)
D1, D21N4007 (or 1N4001) - diodes
Led On, Led D13Red and green - 3mm leds
16 MHzCrystal oscilator 16 MHz
Reset, ESP resetTactile push buttons
7-12VP4 power plug
Male headers2.54mm Single Row 1x20 Pin Header
Female headers2.54mm Single female headers:
- 1 1x5 pins
- 2 1x6 pins
- 2 1x8 pins
- 1 1x10 pins
2.54mm Double female headers:
- 1 2x4 pins
JumpersJumper Short Circuit Cap Connection 2.54mm
 IC Socket IC Socket 28 pins
 IC Socket IC Socket 16 pins

Components Layout


3 comments :

  1. Marcelo boa tarde. Recentemente comprei 4 placas pelo ML. Montei todas elas e a parte do arduino funciona bem, porem não consigo fazer funcionar o esp8266 na programação. Ele sozinho funciona, porem na placa com o arduino não. Pode me ajudar, meu e-mail é marcelo@occ.pro.br. Grato pelo retorno.

    ReplyDelete
  2. Somente uma pequena pausa para férias. A partir da próxima semana tudo estará normalizado. Obrigado.

    ReplyDelete